TiGHT AV

USB 3.1 GEN 1/GEN 2 AOC (ACTIVE OPTICAL CABLE) | Full bandwidth of 10Gbps. Powered by the USB Type A Male device. No external power supply needed. Available in 15m and 30m lengths. • Full bandwidth of 10Gbps. • Proprietary Low Power High Bandwidth Chipset. • EMI (electromagnetic interference) protection. • Powered by the USB Type A Male device. No external power supply needed. • Durable and strong. • Auto Low Latency Mode. • Support hot swap. • Pull Cover included for easy pulling of cables

USB 3.1 GEN 1/GEN 2 AOC (ACTIVE OPTICAL CABLE) | Full bandwidth of 10Gbps. Powered by the USB Type A Male device. No external power supply needed. Available in 15m and 30m lengths. • Full bandwidth of 10Gbps. • Proprietary Low Power High Bandwidth Chipset. • EMI (electromagnetic interference) protection. • Powered by the USB Type A Male device. No external power supply needed. • Durable and strong. • Auto Low Latency Mode. • Support hot swap. • Pull Cover included for easy pulling of cables

The VC-C101U-ETH converts 4K@60Hz 4:4:4(max) DisplayPort alt mode signal over USB-C video input to 4K@60Hz 4:4:4(max) HDMI 2.0 video output.

The VSB-600AF is an all-in-one conferencing soundbar in a compact design, with 4K@30fps video resolution and a built-in 6-mic array. The VSB-600AF supports AEC, ANS and AGC and supports up to 6-meters full-duplex high-quality conferencing calls. It uses and AI algorithm integrated with multiple AI framing technologies enabling the unit to automatically frame the participants in the meeting and adjusts the picture to present the best view. The VSB-600AF supports USB 3.0 over a USB type B port, while also supporting USB 2.0. No driver install is necessary - simply plug it in and open your video conferencing application. The unit comes with a wall bracket for mounting on a wall, or it can be placed on a flat surface standing on its built-in stand. A 5m USB 2.0 cable is also included.

TV mounting brack for VSB-600AF. Display size up to 90"

Analog Signal Cables with color coding XLR-Sleeve, 1m

Analog Signal Cables with color coding XLR-Sleeve, 1,5m

Analog Signal Cables with color coding XLR-Sleeve, 10m

Analog Signal Cables with color coding XLR-Sleeve, 15m

Analog Signal Cables with color coding XLR-Sleeve, 2m

Analog Signal Cables with color coding XLR-Sleeve, 3m

Analog Signal Cables with color coding XLR-Sleeve, 5m

Note, this is HW1 with different design. Plug-and-Play PoE Dante Interface | AU-X2I-DA from TiGHT AV inputs two channels of analog line level audio to your Dante network. It supports sample rates up to 96kHz, using Audinate’s original Dante Ultimo chip. Featuring two female XLR standard connectors, the AU-X2I-DA is a simple and cost-efficient solution to connect analog equipment to a Dante network. PoE support allows for a simplified installation via a PoE-capable network switch or from a separate PoE injector. KEY FEATURES: •Plug and Play •2 x line inputs on standard XLR female connectors -Dante and AES67 support •24-bit audio support •Supports 802.3af PoE -Dante Controller and Dante Domain Manager compatible

Note, this is HW1 with different design. Plug-and-Play PoE Dante Interface | AU-X2O-DA from TiGHT AV outputs two channels of analog line level audio from your Dante network. It supports sample rates up to 96kHz, using Audinate’s original Dante Ultimo chip. Featuring two male XLR standard connectors, the AU-X2O-DA is a simple and cost-efficient solution to connect analog equipment to a Dante network. PoE support allows for a simplified installation via a PoE-capable network switch or from a separate PoE injector. KEY FEATURES: •Plug and Play •2 x line outputs on standard XLR male connectors •Dante and AES67 support -24-bit audio support •Supports 802.3af PoE •Dante Controller and Dante Domain Manager compatible

.

.

The TNET-DEC-H211-DA AVoIP decoder is the perfect complement to our new line of encoders: The H101-DA and the C211-DA.

The TNET-ENC-C211-DA is an innovative encoder that builds on our H101-DA by adding the convenience of a USB-C port with 100W Power Delivery (PD). The TNET-ENC-C211-DA is equipped with a host of features that make it ideal for streaming high-resolution content over a network. It supports 4K60 1G Ethernet with subframe latency, dual LAN ports with PoE+ pass-through, a USB host port, HDMI loop output, 2x2 CH Dante Audio and audio embedding/de-embedding.

The TNET-ENC-H101-DA is a versatile encoder that offers a suite of advanced features for today’s AV environments. The T-NET-ENC-H101-DA is equipped with 4K60 1G Ethernet with subframe latency, making it ideal for streaming high-resolution content over a network. It also features dual LAN ports with PoE+ pass-through, a USB host port, HDMI loop output, 2x2 CH Dante Audio and audio embedding/de-embedding.